SUVTP40KH4B4S APC Smart-UPS VT 40kVA 400V w/4 Batt. Mod


Out of stock

Kindly Note: Prices are subject to Change without Prior Notice.

KSh 1,800,000.00

Out of stock

GET SUVTP40KH4B4S APC Smart-UPS VT 40kVA 400V w/4 Batt. Mod at the best price in Kenya from Starmac Technologies.

Output power capacity

32.0kWatts / 40.0kVA

Nominal Output Voltage

400V 3PH

Nominal Input Voltage

400V 3PH

Input Connections

Hard Wire 5-wire (3PH + N + G)

Maximum Input Current

APC Smart-UPS VT 40kVA 400V w/4 Batt. Mod., Start-Up 5X8, Internal Maint Bypass, Parallel Capability
Effective 10-40kVA 3 phase UPS power protection against downtime and data loss for mission critical applications.
Includes: Battery modules ship installed, Bolt Down Brackets, CD with software, Installation Guide, Network Management Card, Power modules ship installed, Start up included, User Manual
  • Parallel-capacity capable
    Increases total power capacity by using multiple uninterruptible power supplies simultaneously.
  • Parallel-redundant capable
    Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy

Smart-UPS VT Features & Benefits

Marketing Features

Hot-swappable batteries

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced


EU CoC for UPS

Ensures that UPSs sold in the EU are highly efficient


Battery modules connected in parallel

Delivers higher availability through redundant batteries.

Dual mains input

Increases availability by allowing the UPS to be connected to two separate power sources.

Automatic internal bypass

Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Scalable runtime

Allows additional run time to be quickly added as needed.

Generator compatible

Ensures clean, uninterrupted power to protected equipment when generator power is used.



Customize UPS capabilities with management cards.

LED status indicators

Quickly understand unit and power status with visual indicators.

InfraStruXure Manager Compatible

Enables centralized management via the APC InfraStruXure Manager.

Network manageable

Provides remote power management of the UPS over the network.

LCD display

Alpha-Numeric Display which displays system parameters and alarms.

Audible alarms

Provides notification of changing utility power and UPS power conditions

Programmable frequency

Ensures compatibility with different input frequencies.


Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery replacement without tools

Enables fast battery replacement, lowering Mean Time to Repair (MTTR).

Modular design

Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.

Shippable with modules installed

Enables pre-installation UPS staging and testing and faster installation.


Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Cold-start capable

Provides temporary battery power when the utility power is out.

Frequency and voltage regulation

Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Total Cost of Ownership

Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Manual maintenance bypass

Reduces installation costs by eliminating the need for an external mechanical bypass.

Temperature-compensated battery charging

Prolongs battery life by regulating the charge voltage according to battery temperature.

Input power factor correction

Minimizes installation costs by enabling the use of smaller generators and cabling.

Technical Specifications


Max Configurable Power (Watts)

32.0kWatts / 40.0kVA

Output Voltage Note

Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage

Output Voltage Distortion

Less than 5% at full load

Output Frequency (sync to mains)

47 – 53 Hz for 50 Hz nominal

Output Frequency (not synced)

50Hz +/- 0.1% for 50Hz nominal

Other Output Voltages

380, 415

Load Crest Factor

3 : 1


Double Conversion Online

Waveform type

Sine wave

Maximum Output Current



Built-in Maintenance Bypass, Built-in Static Bypass


Input frequency

40 – 70 Hz (auto sensing)

Input voltage range for main operations

304 – 477V

Other Input Voltages

380, 415

Input Power Factor at Full Load


Batteries & Runtime

Battery type


Included Battery Modules


Typical recharge time


Nominal Battery Voltage

+/-192 V (split battery referenced to neutral)

Expected Battery Life (years)

3 – 5

RBC Quantity


Battery Charge Power (Watts)


Extendable Run Time


Battery Volt-Amp-Hour Capacity


Extended Run Options


End of Discharge Battery Voltage

+/-154 V

Communications & Management

Interface Port(s)

DB-9 RS-232, Smart-Slot
Pre-Installed SmartSlot™ Cards

Control panel

Multi-function LCD status and control console

Audible Alarm

Audible and visible alarms prioritized by severity

Emergency Power Off (EPO)



Maximum Height

1490MM, 149.0CM

Maximum Width

523MM, 52.3CM

Maximum Depth

842MM, 84.2CM

Net Weight


Shipping weight


Shipping Height

1643MM, 164.3CM

Shipping Width

650MM, 65.0CM

Shipping Depth

1062MM, 106.2CM



Units per Pallet



Operating Temperature

0 – 40 °C

Operating Relative Humidity

0 – 95 %

Operating Elevation


Storage Temperature

-50 – 40 °C

Storage Relative Humidity

0 – 95 %

Storage Elevation


Audible noise at 1 meter from surface of unit


Online thermal dissipation


Protection Class

IP 20



C-tick, CE, EN 50091-2, EN/IEC 62040-3, IEC 61000-3-2, IEC 61000-3-3, ISO 14001, ISO 9001, RCM, VFI-SS-111

Standard warranty

1 year repair or replace, Start-Up Service
Categories: ,